SIGNIFY EA0815, Инструкция по эксплуатации

Страница: 13 / 61

13
AUS
1300 777 137 service@unclebills.com.au www.signifyelectronics.com.au
Installation (cont)
3. Insert the TV stand screws into the designated holes in the rear of the TV base stand and tighten the screws
firmly with a Phillips Head screwdriver (not included).
CAUTION: Do not apply excessive force while tightening the screws as this may damage the TV base stand.
4. Ensure the TV base stands are securely attached to the rear of the TV before standing the TV upright.
RIGHT
LEFT
Step 3: Assembling Stand Base/Wall Mount Option
1. Ensure the table or desk you use to unpack the TV is flat, clean and stable. Lay a soft cloth or blanket over the
surface to protect the screen of the TV.
NOTE: Always unplug the TV from power outlet when assembling or moving the TV.
2. Observe the markings ("L" or "R") on the base stand. Ensure the longer leg of each TV base stand is facing
outwards from the front of the TV and slide the rectangular section on the top of the TV base stand into the
designated slot on the rear of the TV.
M4 x 12mm
WARNING: If the TV is not positioned or installed in a sufficiently safe and stable location, it can create a potential
hazard by falling, resulting in injury and damage to the unit and its surroundings, particularly in environments
where children may be present. To prevent injuries from your television falling, please refer to page 11 for taking a
few simple precautions.