11
AFTER SALES SUPPORT
AUS 1300 777 137 EMAIL service
@
unclebills.com.au
Product Overview (cont)
Previous Song/FM Previous Frequency
Use the previous song/previous frequency button to skip to the previous track while it is playing and
to scroll through tracks (applicable for MP3 USB or SD card playback modes). The previous song/
previous frequency is also used in FM mode to skip to the previous pre-set radio station. When the
previous song/previous frequency button is held down this will also decrease the music volume to a
desired setting, U00 being no volume.
Pause/Play/FM Search
Use the pause/play button to play or pause tracks while in MP3 audio playback (AUX/USB/SD CARD),
FM radio, or Bluetooth®. The play/pause button is also used to auto-search for radio stations with a
strong enough signal to play. The stations found will automatically be allocated in order, to the presets
(up to 20 channels).
Next Song/FM Next Frequency
Use the next song/next frequency button to skip to the next track while it is playing and to scroll
through tracks (applicable for MP3 USB or SD card playback modes). The next song/next frequency
is also used in FM mode to skip to the next pre-set radio station. When the next song/next frequency
button is held down this will also increase the music volume to a desired setting, U30 being full
volume.
LED Light Display Effects
The Entertainment System features colour changing LED lights on the front panel of the device. To
turn on the LED lighting effects, simply switch the LED light power switch located on the rear of the
unit. The LED lights will illuminate and follow the rhythm of the music.
Power On/Off
Plug the power cord into a suitable power outlet, then turn on the power switch on at the outlet. Press
the power switch on the top panel to turn on the speaker. The display on the top panel will illuminate
and display into default mode AUX (except if there is a USB or SD card loaded).
Standby Mode
Press the power button on the remote to enter into standby mode on the Entertainment System. Press
again to turn the Entertainment System on from the standby mode.
Please note that to disconnect the Entertainment System completely from power, you will need to
switch off the power switch on the top panel and then turn off the power at the outlet.
