AFTER SALES SUPPORT
1300 777 137
MODEL: EA2206 PRODUCT CODE: 708117 04/2022
9
GETTING STARTED (CONT.)
NOTE: If you are on rocky or uneven terrain, adjust the tripod leg extensions to the
appropriate height to maintain a level position. Use the gradient leveller to check if the
tripod is level.
NOTE: You do not need to extend each leg section fully, once the leg is at the desired
length, press the leg lock lever back into place to secure the leg into position.
CAUTION: The gradient leveller is made of glass and is easily damaged. Take care when
handling the tripod. Do not drop the tripod. Do not place the tripod where it can fall, be
trodden on or damaged in any way.
Mounting the Spotting Scope to the Tripod
The high magnification of your Spotting Scope makes it
very difficult to see clearly through it when just holding
the Spotting Scope in your hand. For this reason, it is
recommended to mount the Spotting Scope onto the
tripod (supplied), whenever you are using it. Follow the
steps below for how to mount the Spotting Scope to
the tripod.
1. Remove your Spotting Scope from the carry case
(included).
2. Align the screw on the mounting plate with the
tripod mount located on the Spotting Scope
mounting head (Fig. 2). Holding the knob located
under the mounting plate with one hand, with the
other hand turn the Spotting Scope clockwise until
it is securely attached to the tripod.
3. The Spotting Scope should be positioned on the
tripod so that the gradient leveller is on the left
hand side (when the objective lens is facing away
from you and the eyepiece is closest to you) of the
Spotting Scope (Fig. 3).
Fig. 2
Fig. 3
