21
#$%&(
# /L
Current outputs are passive outputs that can be spanned in the
forward and reverse direction. Example: 0 to 5 or 5 to 0.
):'K +
'
1. Go to the Calibrate Menu.
2. ( to the
L
menu.
3. P£Z+
4. G
control this loop:
/
.
5. PZ
6. ( 1 menu to the
L!
menu.
7. P£Z+
8. Select the minimum and maximum process values for the current
loop output:
'
.
9. PZ
10. Exit to the View Menu.
System Start-up: Step 6 (last step)
#$" " " % " "" &' "
This concludes the system start-up procedure.
) & * E L )
Calibrate Menu
Set and save
Set and save
Loop 1 Source:
Chlorine
>
Step 2
Loop 1 Rng: ppm
0.00 5.00
>
6
) & * E L )
) & * E L )
Cl In Process
Calibration:
>
In Proc: ppm&nA
2.67 / 103.8
) & * E L )
Calibrate Menu
P
entered here.
ENTER
ENTER
Step 5
?+ "E
/ '&
? J/
# /L+!(
"E/
1. Q(P;A
2. Use this sample to measure the chlorine content with a
PQ; A*PQ
instructions on how to perform this test.
3. Record the test results.
):'K/ "E'
4. Go to the Calibrate Menu.
5. ( 2 menus to the
/"E
menu.
6. P£Z+
7. Z P
the edit screen:
'
. The Cl ppm is editable and must
be at least 0.2 ppm.
8. PZ
9. Exit to the View Menu.
Calibration is complete for the chlorine sensor.
=)K
For greater accuracy, it is recommended that
P
averaged together.
