Signature SHI90X, Инструкция по эксплуатации

Страница: 39 / 47

13. Fix the upper chimney section to the hanging plate, using the 4xST4 x8
tapping screws.
14. Slide the lower chimney section onto the angle bars and raise it until it sits
just below the upper chimney section. Then lift up the lower chimney and set
it with the S hanging hook, in order to convenient for the following assemble.
Noted: make sure the extraction holes can be covered by the lower chimney.
15. Lift the main body of the cooker hood onto the angle bar and then fix it
into position using the 16 x M5 screws.
IMPORTANT: This stage of the installation process MUST be completed by two
people.
IMPORTANT: The 16 x M5 screws MUST be securely tightened.
-3 9 -