Signature SHD60PERI, Инструкция по эксплуатации, Страница: 29 / 37

1
2
3
4
-29-
•Open the glass panel and remove the aluminum grease filter and mark the four holes
for the installation from the inside of the hood.
•Take the hood back down again.
Drill the four ø 8 mm holes in the wall at the marked locations.
Insert four wall plugs into the holes
，
Screw four screws into the wall.
•Hang the extractor hood back in the wall bracket and tighten the four screws on the
inside of the extractor hood.