When transportation, hold the base and lift the
refrigerator carefully with an angle inferior at
45 degree. Never hold the door handle as
support. Never place it upside down nor
horizontally. Push refrigerator on its basis and
place it thanks to its roller feet.
To fix stably, the appliance must be placed on a
flat and solid surface. It should not be laid on
any soft material.
Choose a location where there is no heat
source. Keep the refrigerator away from direct
sunlight or other appliance producing heat.
Choose a dry and well-ventilated place where
there is no corrosive air.
In order to improve efficiency of the cooling
system and save energy, it is necessary to
maintain good ventilation around the appliance
for the dissipation of heat. For this reason,
sufficient clear space should be available
around the refrigerator.
The appliance is supplied with two plastic
spacers. After installation of these spacers, the
appliance cannot be pushed against the wall to
maintain proper ventilation. Insert the spacers
into the relevant openings on the back of the
appliance, then screw the spacers tightly. Place
the appliance against a wall with a free
distance that not exceeding 75 mm but more
than 50mm.
TRANSPORT AND HANDING
INSTALLATION
-35-
