Cautions
-
The hob must be installed by qualified personnel or technicians, we
have professionals at your service. Please never conduct the
operation by yourself.
-
Do not mount the hob above cooling equipment, dishwashers and
touble dryers.
-
The hob shall be installed such that better heat radiation can be
ensured to enhance its reliability.
-
The wall and induced heating zone above the work surface shall
withstand heat.
-
To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
-
A steam cleaner is not to be used.
-
This hob can be connected only to a supply with system impedance
no more than 0.427 ohm. In case necessary, please consult your
supply authority forsystem impedance information.
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a
suitably qualified person. Before connecting the hob to the mains
power supply, check that:
1.
The domestic wiring system is suitable for the power drawn by
the hob.
2.
The voltage corresponds to the value given in the rating plate.
3.
The power supply cable sections can withstand the load
specified on the rating plate. To connect the hob to the mains
power supply, do not use adapters, reducers, or branching
devices, as they can cause over heating and fire.
EN
-
2
4
Содержание 4894223233514
Страница 41: ...I N S T R U C T I O N S F O R U S E E N E L E C T R I C H O B S T I 4 F 2 F L E X F ex Zone Flex Zone...
Страница 65: ...Aftering installing the hob Before locating the fixing brackets Locating the fixing brackets left right 23...
Страница 77: ...BUT INTERNATIONAL 1 Avenue Spinoza 77184 Emerainville France...