23
SMART FUNCTIONS
ENGLISH
FCC Notice
The following notice covers the transmitter module
contained in this product.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules and also Part 18 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
−
Reorient or relocate the receiving antenna.
−
Increase the separation between the equipment
and the receiver.
−
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
−
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15, Part 18 of the FCC
Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
Any changes or modiications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
FCC RF Radiation Exposure
Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with
a minimum distance of 20 cm (7.8 inches) between
the antenna and your body. Users must follow the
specific operating instructions for satisfying RF
exposure compliance.
Industry Canada Statement (For
transmitter module contained in this
product)
This device complies with Industry Canada’s
applicable licence- exempt RSSs. Operation is
subject to the following
two conditions:
1) This device may not cause interference; and
2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Industry Canada ICES-001 Compliance Label: CAN
ICES-1/NMB-1
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with
a minimum distance of 20 cm (7.8 inches) between
the antenna and your body.
NOTE
•
The manufacturer is not responsible for any radio or
TV interference caused by unauthorized
modiications to this equipment. Such modiications
could void the user's authority to operate the
equipment.
Wireless LAN module Specifications
Model
LCW-003
Frequency Range
2412 MHz - 2462 MHz
Output Power
(Max)
IEEE 802.11b: 17.56 dBm
IEEE 802.11g: 25.53 dBm
IEEE 802.11n: 25.29 dBm
Содержание SKSCR3001P
Страница 43: ...42 MEMO MEMO ...
Страница 44: ...43 MEMO MEMO ...
Страница 45: ...Customer Information Center For inquires or comments call 1 855 790 6655 USA Consumer User ...