3
Stone Trough Console Sink Installation Instructions
Read instructions completely before installing.
Note: Use care when lifting and installing any sink.
Place sink on a level surface with a towel or other
soft cloth beneath to prevent damage.
TOOLS AND MATERIALS:
Pencil
BEFORE INSTALLING
INSTALLATION
UNDERMOUNT SINK
1. Carefully turn the vanity top over so that it rests upside-down
on a stable, cushioned surface.
2. Position the undermount sink over the sink cutout. Make sure
the sink is centered with the faucet hole and is evenly spaced
between the bolt holes.
3. Draw an outline of the sink on the vanity top.
4. Remove the sink from the vanity top and apply a generous
bead of silicone around the sink rim.
5. Carefully place the sink upside down on the vanity top,
positioning it within the outline.
6. At each of the bolt holes in the vanity top, attach the sink clips
by placing the long end of the bracket flat against the sink lip.
Screw the wing bolts through the brackets and bolt holes and
tighten snugly.
7. Carefully turn the top and sink over. If needed, reposition the
sink by slightly loosening the wing bolts and adjusting the
placement. Re-tighten the bolts when finished.
8. Remove any excess silicone sealant with a damp cloth. Let
silicone dry for 24 hours.
Neutral Cure
Silicone Sealant
Damp Cloth
For counters with a backsplash, apply silicone to
the backsplash's edge and wall-facing side.
Position the backsplash to the rear of the counter
and against the wall. Allow silicone to dry.
