5. Apply plumber’s tape or thread sealant to the
threading on each of the faucet’s water lines, then
connect them to the main water supply. Use an
adjustable wrench to tighten, but be careful not to
overtighten. Ensure that you are connecting the hot
and cold lines appropriately.
MALEKO SINGLE HOLE FAUCET INSTALLATION
6. Proceed to the drain installation. Once complete,
remove the aerator from the spout and turn the faucet
on for approximately 60 seconds to remove any dust or
loose sediment from the water lines. Ensure that there
are no leaks, and that both hot and cold water are
running properly. Turn the water off and reattach the
aerator.
5. Once installation is complete, turn the main water
supply back on from underneath your sink. Check for
any leaks underneath.
3
Maleko Single Hole Faucet Installation Instructions
ON
