KESWICK FREESTANDING FAUCET INSTALLATION
Installation
3. Slide the decorative baseplate onto the faucet body,
as shown.
4. Attach the mounting bracket by threading it onto the
base of the faucet. Hand tighten firmly. Position the
faucet at its desired location, then mark the location of
the mounting holes on the floor. Set the faucet aside.
1. Connect the provided braided water lines to the
supply posts on the faucet’s spout. Apply thread
sealant or plumber’s tape to the threads before
tightening. Hand tighten the connections firmly.
Tip:
Place a piece of masking tape on the bottom of
the hot water line. This will prevent the hot and cold
lines from being crossed when it is time to connect to
the main water supplies.
2. Feed the water lines through the faucet body and
attach the spout by threading it onto the body.
2
Keswick Freestanding Faucet Installation Instructions