EXIRA SHOWER SET INSTALLATION
1. Once the finished wall is complete, remove the
protective sleeves from the valve stems. If the test plug
has not yet been removed, remove that as well.
2. Slide the decorative back plate onto the valve. Ensure
that the markings located above each opening on the
back plate are facing up.
4. Once all piping is routed and connections have been
made, use the provided ½” test plug to perform a water
pressure test. Turn on the main water supply to the
home and water test the installed plumbing. Ensure
that there are no leaks, then shut the water off.
Remove the test plug.
Note:
Water pressure testing should be performed by
a licensed plumber if you are not familiar with this
procedure.
3
Exira Shower Set Installation Instructions
Step 2: Trim Installation
IMPORTANT: COMPLETE THE CONSTRUCTION OF
YOUR WALL, INCLUDING ANY FINISHED WALL
MATERIALS SUCH AS TILE, BEFORE PROCEEDING
WITH THE REMAINDER OF THE INSTALLATION.
STOP
