manualshive.com logo in svg

Signametrics SMX4030, Руководство оператора

Поделиться
Скачать
Signametrics SMX4030 Скачать руководство пользователя страница 17

17                                                        

Signametrics

 

Configuration Option Checks

 - This section of the main panel allows the selection of one out of all of the possible 

pre defined configurations. On power up, the configuration is set to 

Disabled

. Possible selections include 

Disabled, 

TwoWire, FourWire, SixWire, Universal, TwoGroups, and FourGroups

. 

 
Edit

 

Menu

 - This menu item has three selections, setting all parameters to their default value, opening the Edit 

Scanner Parameter sub-panel, and opening the Scan List Editor sub-panels. 
 

Trigger

 

Menu -

 This menu item controls the functionality of the scanner’s trigger input and output signals. It 

enables or disabled the Trigger output, and sets the polarity of both Trigger input and output. 
 

Tools

 

Menu

 - This menu item provides access to some of the special test and cleaning tools. It includes the Self- 

Cleaning function, the various self-tests, and the shorted input detector. 
 

Operations

 

Menu -

 This menu item allows running some of the special scanner’s operations such as AutoScan, 

Triggered Scan, Triggered Auto Scan, and the setting and monitoring of the Trigger output and trigger input 
respectively. 
 

4.0 Scanner Tutorial

  

 Most of the SMX4000 functions are accessible from the control panel described in the previous section. This 
section describes in detail the Scanner’s operations and practices. To gain familiarity with the SMX4000 series 
Scanners, run the Windows ‘SETUP.EXE’ to install the software, then run the Scanner control panel to demonstrate 
its operations. 

4.1 Scanner Configurations  

The various configurations maybe experimented with using the control panel. Connect to the Scanner’s terminals to 
the appropriate channels and bus lines, making sure not to exceed any of the specifications and limits. Use the 
control panel’s option checks to select the desired operation mode, and the switch buttons to close or open the 
appropriate channels. 
 
The SCANSetConfig() DLL function sets the Scanner configuration. The amount of time it takes to set a new 
configuration is equat to the set Actuation time. The Scanner can function as a multiplexer, or as an uncommitted 
matrix switch. In the 

TwoWire

, 

FourWire

, 

SixWire

, 

TwoGroups,

 and 

FourGroups 

configurations the Scanner acts as 

a multiplexer. This means that when a channel is selected, all other channels in the group are opened prior to closing 
the selected channel. For instance, in 

FourWire 

configuration, the responose to ‘select Ch2) will result in opening of 

a previousely selected channel relays and the closure of Ch2 and Ch18. All this will be done within a single 
actuation time. 

Содержание SMX4030






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды