SignaMax SC30010, Справочное руководство CLI

Страница: 545 / 671

Chapter 21
| Multicast Filtering Commands
MLD Filtering and Throttling
– 545 –
MLD Filtering and Throttling
In certain switch applications, the administrator may want to control the
multicast services that are available to end users. For example, an IP/TV
service based on a specific subscription plan. The MLD filtering feature fulfills
this requirement by restricting access to specified multicast services on a
switch port, and MLD throttling limits the number of simultaneous multicast
groups a port can join.
Report & Leave
Host Addr
The link-local or global IPv6 address that is assigned on that VLAN.
Unsolicit Expire
The number of group leaves resulting from timeouts instead of
explicit leave messages.
Table 112: show ipv6 MLD snooping statistics summary - display
description
Field Description
Table 113: MLD Filtering and Throttling Commands
Command Function Mode
ipv6 mld filter Enables MLD filtering and throttling on the switch GC
ipv6 mld profile Sets a profile number and enters MLD filter profile
configuration mode
GC
permit, deny Sets a profile access mode to permit or deny IPC
range Specifies one or a range of multicast addresses for a
profile
IPC
iipv6 mld filter
(Interface Configuration)
Assigns an MLD filter profile to an interface IC
ipv6 mld max-groups Specifies an M:D throttling number for an interface IC
ipv6 mld max-groups
action
Sets the MLD throttling action for an interface IC
ipv6 mld query-drop Drops any received MLD query packets IC
show ipv6 mld filter Displays the MLD filtering status PE
show ipv6 mld profile Displays MLD profiles and settings PE
show ipv6 mld query-drop Shows if the interface is configured to drop MLD query
packets
PE
show ipv6 mld throttle
interface
Displays the MLD throttling setting for interfaces PE