SignaMax SC30010, Справочное руководство CLI

Страница: 547 / 671

Chapter 21
| Multicast Filtering Commands
MLD Filtering and Throttling
– 547 –
Command Mode
Global Configuration
Command Usage
A profile defines the multicast groups that a subscriber is permitted or denied
to join. The same profile can be applied to many interfaces, but only one
profile can be assigned to one interface. Each profile has only one access
mode; either permit or deny.
Example
Console(config)#ipv6 mld profile 19
Console(config-mld-profile)#
Related Commands
show ipv6 mld profile
permit, deny
This command sets the access mode for an MLD filter profile. Use the no form
to delete a profile number.
Syntax
{ permit | deny }
Default Setting
deny
Command Mode
MLD Profile Configuration
Command Usage
◆
Each profile has only one access mode; either permit or deny.
◆
When the access mode is set to permit, MLD join reports are processed
when a multicast group falls within the controlled range. When the access
mode is set to deny, MLD join reports are only processed when a multicast
group is not in the controlled range.
Example
Console(config)#ipv6 mld profile 19
Console(config-mld-profile)#permit
Console(config-mld-profile)#
range
This command specifies multicast group addresses for a profile. Use the no
form to delete addresses from a profile.