SignaMax SC30010, Справочное руководство CLI

Страница: 132 / 671

Chapter 4
| System Management Commands
Time
– 132 –
SMTP Minimum Severity Level: 7
SMTP Destination E-mail Addresses
-----------------------------------------------
ted@this-company.com
SMTP Source E-mail Address: bill@this-company.com
SMTP Status: Enabled
Console#
Time
The system clock can be dynamically set by polling a set of specified time
servers (NTP or SNTP). Maintaining an accurate time on the switch enables
the system log to record meaningful dates and times for event entries. If the
clock is not set, the switch will only record the time from the factory default set
at the last bootup.
Table 23: Time Commands
Command Function Mode
SNTP Commands
sntp client Accepts time from specified time servers GC
sntp poll Sets the interval at which the client polls for time GC
show sntp Shows current SNTP configuration settings NE, PE
sntp server Specifies one or more time servers GC
NTP Commands
ntp authenticate Enables authentication for NTP traffic GC
ntp authentication-key Configures authentication keys GC
ntp client Enables the NTP client for time updates from specified
servers
GC
ntp server Specifies NTP servers to poll for time updates GC
show ntp Shows current NTP configuration settings NE, PE
Manual Configuration Commands
clock summer-time (date)
Configures summer time * for the switch’s internal clock
* Daylight savings time.
GC
clock summer-time
(predefined)
Configures summer time
*
for the switch’s internal clock GC
clock summer-time
(recurring)
Configures summer time
*
for the switch’s internal clock GC
clock timezone Sets the time zone for the switch’s internal clock GC
calendar set Sets the system date and time PE
show calendar Displays the current date and time setting NE, PE