SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
48
role <port_list> <active |
passive>
To set up whether LACP ports are active or
passive.
<port_list>: Specify a port number or multiple
port numbers with the format 5, 7, 8, 9, 12 or
5, 7-9, 12
<active | passive>: Active LACP ports are
capable of processing and sending LACP
control frames. This allows LACP compliant
devices to negotiate the aggregated link so
that the group may be changed dynamically
as required. In order to utilize the ability to
change an aggregated port group, that is, to
add or remove ports from the group, at least
one of the participating devices must
designate LACP ports as active. Both devices
must support LACP.
LACP ports that are designated as passive
cannot initially send LACP control frames. In
order to allow the linked port group to
negotiate adjustments and make changes
dynamically, one end of the connection must
have “active” LACP ports.
For example:
SWH(config-aggr-lacp)# role 1-4,10-15,18,19
active
2.6.3 Dot1x command mode
SWH(config)# dot1x
SWH(config-dot1x)#
Command
Purpose & Description
Usage
=================== ===========================
=============================
sys Enter Sys Cmd. Mode sys
state Set State state <port_list> <type>
authentic Reset Authenticate authentic <port_list>
exit Exit from current mode exit
show Show Dot1x Settings show
SWH(config-dot1x)#
Prompt
Command & Parameter
Description
mode <enable | disable>
To enable or disable 802.1X for the Managed
Switch.
server <ip_addr>
RADIUS Authentication server address.
secret <shared_secret>
The identification word or number assigned to
each RADIUS authentication server with
which the client shares a secret.
<shared_secret>: Specify a shared secret of
up to 30 characters
reauth <enable | disable>
To enable or disable Reauthentication.
SWH(config-dot1x-
sys)#
period <reauth_period>
The time interval that the system sends out
periodic reauthentication message.
<reauth_period>: 0~3600 Seconds
