Signamax Connectivity System 065-9066
www.signamax-us.com
www.signamax-eu.com
2.Change Codec
3.Enable/Disable UK PSTN Tone Detection?
4.Enable/Disable Dial Complete Tone
5.Dial Termination Key Setting
6.FXS Parameters Setting
1.Change FXS Impedance
2.Change Phone In Volume
3.Change Phone Out Volume
4.Flash Detection
5.Ring Frequency
6.FXS Battery reversal generation
(3)Network Advance
(3)Network Advance
(3)Network Advance
(3)Network Advance
1.Disable Smart QOS
2.Bandwidth Control
3.G.723 Bandwidth
4.G.729 Bandwidth
5.Set IP TOS
[1]Advanced Setup
[1]Advanced Setup
[1]Advanced Setup
[1]Advanced Setup
……7.Hot Line Setting
1.Change Port1 Hot Line Number
2.Change Port2 Hot Line Number…….(To your own port)
[2] System Administration.
[2] System Administration.
[2] System Administration.
[2] System Administration.
1.Save Configuration
2.Access Control
3.Set to Default
4.System Information
5.NTP Setting
6.Syslog Setting
2.3.4 Web User Interface
Connecting to the Web Configuration via a Web Browser
Connecting to the Web Configuration via a Web Browser
Connecting to the Web Configuration via a Web Browser
Connecting to the Web Configuration via a Web Browser
1.
Launch the Web browser (IE or Firefox). Enter http://
http://
http://
http://192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1 into the browser Address
Address
Address
Address
window and press the Enter Key
2. An authentication dialog box will open.
3. If this is a first time setup of the router, type “admin”
admin”
admin”
admin” as the User Name and the Password
field as “admin”
admin”
admin”
admin”. Click OK
OK
OK
OK.(Default username/Password is “admin”)
4. The Web Configuration Setup Main Menu will open. On the main page [GSM Setup], [Advanced
Setup] and [System Information] were displayed.