7
If you wish for the router to dynamically update its routing tables, specify whether RIPv2
dynamic routing information is to be received or transmitted (or both). Press "Save Router
Settings" to save and apply the dynamic routing settings. Any new settings will take effect
immediately.
In addition, up to eight static route entries can be assigned. To add a static route, enter the static
route Destination IP Address, Subnet Mask, Gateway IP Address, Metric, and Interface, and press
the "Add" button. Metric is a number from 1 to 15 inclusive. To remove a static route, press the
"Remove" button next to the entry you wish to remove.
To view the device’s current internal routing table, press the "View Routing Table" button. A
popup window will appear displaying the routing table. Press "Update" to update the route
entries. Press "Close" to close the routing table window.
2.4 Port Forwarding (NAPT) Settings
This page allows the user to customize the devices port forwarding feature. The port forwarding
feature does not apply if the device is operating in bridge only mode.
Port forwarding provides WAN access to the internal LAN, by specifying that traffic over certain
ports are to be directed at particular LAN hosts. This feature is available only in router mode. Up
to eight port forwarding entries ("Pinholes") can be configured. To add a port forwarding entry,
configure the Port Range to be forwarded, the Protocol to be forward (TCP, UDP or both), and
destination LAN IP Address. Press the "Add" button to add the entry. To remove an existing
entry, click the "Remove" button next to that entry you wish to remove.
