10
Press "Save WAN Settings" to save and apply the new values. Any new settings will take effect
immediately.
3.3 Ethernet WAN PPPoE Settings
On this sub-page you can specify whether the WAN interface is to use PPPoE, and configure the
PPPoE client. First, select whether PPPoE is enabled or disabled. If enabled, enter the username
and password required for the login (authentication) process.
Setting the idle-timeout will result in the PPP connection being torn down if the client detects
inactivity on the connection over the specified timeout period. Leaving this field blank will result
in the connection being permanently up (i.e. without timeout).
If the PPPoE server (service provider) requires any special Service Name or AC Name to be set,
you can specify these tags here.
Press "Save PPPoE Settings" to save and apply the WAN interface PPPoE client settings. Any
new settings will take effect immediately.