Signal NVR 2708, Руководство пользователя

Страница: 14 / 51

- 14 -
Pic 2.5.5.2 PTZ control
2
、
、 、
、
Tour
Multiple preset points connected tour ,the PTZ run around on the line
1
）
Tour Settings
Tour is connected by multiple preset points, setting procedure is as follows:
Step1: In Picture 2.5.5.0, the Direction key will turn PTZ to designated location ,click Settings
button to enter Picture 2.5.5.3.
Step 2: click Tour buttons, then input proper value into the Preset points and Patrol No blank
，
click Add Preset Points button, complete setting (also can add and delete tour preset which has been set
up)
Step 3: repeat step1 and step2 , until set out all the preset designated Cruise lines.
Remove Preset
：
Please input preset value in the blank, click Remove Preset button, then
remove the preset points.
Remove Tour
：
Input the number of tour, click Remove tour button, then remove the tour set
。
Pic 2.5.5.3 Tour setup
2
）
The Calls of Tour
In Picture 2.5.5.0, click Page Switch button, enter PTZ control menu as shown in Picture 2.5.5.2.
Please input the number of tour in the value blank, then click tour button, PTZ begins to work on the tour
patrol. Click Stop button to stop tour.
Value input blank
Tour Button
Patrol number Blank
Preset Points Blank
Time interval