16
) Save Config:
Yes/No
-to save/give up the adjustment of setting.
17
) Load Saved CFG:
Yes/No
-to load/ not to load the saved configuration.
18
) Factory Reset:
Yes/No
-choose/not choose the factory’s default configuration.
19
) LCD Time out: A time limit that LCD will light off. Choose among 5s, 10s, 45s, 60s, 90s and
120s (seconds).
20
) Key Password: to set a 6-digit password for unlocking the keyboard.
21
) Lock Keyboard: Choose
Yes
to lock the keyboard, then the keyboard will be locked and
cannot be applicable. It is required to input the password to unlock the key board. This
operation is one-off. (Password forgotten, please use the universal code “
005599
”.)
22
) Product ID: User can view the serial number of this device. It is read-only and unique
23
) Version: It displays the version information of this device.
Encoder Modulator
: the name
of the device;
Ver
: version number of this device.
CHAPTER 4 How to Upgrade
SIGNAL-400 encoder modulator is embedded with USB Port for upgrading. The supported file
format is IMG.
Upgrade steps
: Insert USB device
→
Upgrade automatically(It will need 10-20 seconds to
upgrade. After upgrade, SIGNAL-400 will reboot automatically.)
→
Remove USB device
→
Power off
→
Power on.
USB Port for Upgrade