Signal Hound USB-SA44B, Руководство пользователя, Страница: 5 / 18

Preparing for Use |
Initial Inspection
1
1 Preparing for Use
Unpacking your Signal Hound and Installing Software
The Signal Hound USB-SA44B is a USB-based 1 Hz to 4.4 GHz economy spectrum analyzer and
measuring receiver with an RF preamplifier. Using recent innovations in RF technology, the Signal Hound
has the sensitivity, accuracy and dynamic range you’d expect in a unit many times its cost. The Signal
Hound is powered from the USB cable, eliminating the need for a separate power supply. Measuring
less than 8 inches long and weighing only ten ounces, the Signal Hound can be used virtually anywhere!
1.1 INITIAL INSPECTION
Check your package for shipping damage before opening. Your box should contain a USB cable, a CD-
ROM, and a Signal Hound USB-SA44B.
1.2 SOFTWARE INSTALLATION
The Signal Hound is operated from a Windows®-based PC using our Spike TM application software.
The Signal Hound software and drivers are compatible with 64 and 32-bit Windows
®
7/8/10 operating
systems. 64-bit Windows operating systems are recommended. You must have a computer with at least
500 MB of free disk space, 4 GB of RAM, and USB 2.0. An Intel
® Core i3 or equivalent is recommended.
For serial numbers below 21000000, an internet connection is required the first time you launch