SIGN RACER 1600 LED, Руководство по эксплуатации

Страница: 54 / 73

54
5.2 Cache problem
(The carriage pause too long at the two ends of the lead rail during the
printing process.)
There might be two aspects that cause this problem, below are the causes explanations and
solutions.
Excessive image size or excessive file gross result in long data processing, and thus relate to
printing data transmitting slowdown. Normally when processing some large image or a great
amount of images, adopt the mode of print after RIP.
A virus might have affected the computer. Execute anti-­‐virus operation periodically.
The windows power settings must be on “High performance”, otherwise within a print pass the PC
could crash
5.3 Printing error
(with a message reads “Device is busy, please check the media location plate,
raster reader and motor driver, try again.”), The causes might be:
Anti-­‐crashing attachment enabled
Media positioning attachment enabled
Encoder malfunction due to accidental crash with obstacle.
Data transmitting error due to abrasion of the optical fiber.
6. Automatic head height adjustment malfunctions
When a problem with the head height adjustment assembly occurs, check and see whether there
is non-­‐working or retards.
If the carriage can only be operated going up but not going down. Check if there are too many
dirts makes the electromagnet clog and not able to effect action, or if the head height finder is
broken.
Head carriage goes up, but does not move onto the media? Check the anti crash bar on the lamp
house. It might be activated when reloading the media.