SIGMATEK SCP 111 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 64

background image

S-DIAS SAFETY CPU MODULE

SCP 111

04.11.2020

Page 9

Designated Use

The  Safety  modules  are  designed  for  use  in  safety-oriented
applications  and  meet  the  required  conditions  for  safety
operation  in  compliance  with  Performancelevel  e  (PL  e),  in
accordance  with  EN  ISO  13849-1/-2  and  SIL3  or  SIL  CL  3  in
accordance with EN 62061.

For your own safety and the safety of others, use safety modules
for their designated purpose. Correct EMC installation as well as
proper transport and storage are also included under designated
use.

Non-designated use consists of

•

any change made to the safety modules of any kind.

•

the use of damaged safety modules.

•

the use of the safety module outside of the instructions
described in this handbook.

•

the use of the safety module outside of the technical
data described in this handbook.

Utilisation prévue

Les  modules  de sécurité sont  conçus  pour  une  utilisation  dans
les applications sollicitant un niveau de sécurité et répondent à
toutes  les  conditions  nécessaires  pour  un  fonctionnement  sûr
conformément au niveau de performance e (PL e) selon la norme
EN ISO 13849-1/-2 et SIL 3 ou SIL CL 3 de la norme EN 62061.

Utilisez  le  module  de  sécurité  conformément  à  son  mode
d’emploi pour votre propre sécurité et celle d'autres personnes.
L'utilisation  conforme  comprend  également  une  installation
conforme CEM ainsi que le transport et le stockage conforme.

L'utilisation abusive comprend entre autres:

•

Les modifications quelconques apportées aux modules
de sécurité.

•

Utilisation de modules de sécurité endommagés.

•

Utilisation de modules de sécurité en dehors du cadre
décrit dans ce mode d’emploi.

•

Utilisation de modules de sécurité en dehors des
spécifications décrites dans ce mode d’emploi.

«
...
9
10
11
12
13
...
»

Содержание SCP 111

































































Отзывы:

Нет отзывов

Похожие инструкции для SCP 111

Бренд: UE Страницы: 4

Бренд: Balboa Instruments Страницы: 10

Бренд: Quantum Data Страницы: 36

Бренд: NEC Страницы: 146

Бренд: ZETRON Страницы: 3

Бренд: Manfrotto Страницы: 16

Бренд: FATEK Страницы: 10

Бренд: Radware Страницы: 98

Бренд: RabbitCore Страницы: 34

Бренд: Uniden Страницы: 28

Бренд: UniFocus Страницы: 23

Бренд: UniFocus Страницы: 6

Бренд: K&G GROEP Страницы: 27

Бренд: CAME Страницы: 2

Бренд: CalAmp Страницы: 13

Frigolink FVB110B

Бренд: WURM Страницы: 4

Бренд: National Instruments Страницы: 17

Бренд: Davey Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды