10.1" HANDHELD CONTROL PANEL
HGT 1051
17.12.2019
Page 7
2.2
General Safety Guidelines
According to the EU Guideline 2006/42/EG, the operating instructions are a
component of a product.
This manual must therefore be accessible in the vicinity of the machine,
since it contains important instructions.
The technical documentation should be included in the sale, rental or transfer
of the product.
Please read the corresponding data sheets, operating instructions and oper-
ator instructions thoroughly before handling Safety modules. SIGMATEK is
not liable for damages caused through non-compliance with these instruc-
tions or respective regulations.
The general and special safety instructions described in the following sec-
tions, as well as technical regulations, must therefore be observed.
Subject technical changes, which improve the performance of the devices.
The following documentation represents a series of product descriptions. It
does not guarantee properties under the warranty.
Regarding the requirements for Safety and health connected to the use of
machines, the manufacturer must perform a risk assessment in accordance
with machine guidelines 2006/42/EG before introducing a machine to the
market.
