ETT 2144
BUILD-IN TOUCH TERMINAL
Page 36
12.02.2020
15.1 Removing the PIM from the Touch Panel
This product is a sensitive electronic device. When mounting, as well as dis-
mantling, note that you come into contact with ESD-sensitive areas of the
device.
The applicable ESD measures must be taken!
To remove a PIM from a TP, follow the steps below:
1.
Ensure that an ESD-compliant working
method is followed (ESD armband,
ESD clothing).
2.
Disconnect the device from the supply.
3.
Place the TP flat on its back.
4.
Loosen the 4 screws with a TX10
screwdriver
5.
Slide the PIM in the direction of the up-
ward as shown.
6.
Remove the PIM from the TP.
