Sigmasec PTZ-205AHD, Руководство пользователя

Страница: 5 / 34

Page
5
In this section, the text describes the main function of infrared intelligent speed dome camera
and the general principle of implementation, not involving the specific operation method. For
different system platform specific operation method is not the same, generally the system
manufacturer's operation manual shall prevail, in some cases there are some special require-
ments and operation method, please contact the dealer to get the necessary information.
●
Focus / PTZ Speed Auto Match
The pan/tilt rotation speed could be automatically adjusted according to the focus in/out
which makes it much more practical for manual target tracking
●
Auto Flip
When the camera tilts downward and goes just beyond the vertical position, the camera
will rotate 180 degrees.
●
Preset Position Set up and Call Up
In the Preset function the dome stores the current pan/tilt angle, zoom and other position
parameters in its memory. When necessary the dome recalls these parameters and adjusts the
camera to a particular position. The user can store, recall and clear the presets easily and
promptly by using the keyboard controller. The dome can store up to 256 presets.
●
Auto Scan
Users can set up the left and right boundaries by control keyboard. Then speed dome can
scan between the boundaries
.
It supports up to 8 groups of scanning paths.
●
Cruising Track
The preset position can be programmed to be recalled in a set of sequences. This sequence
can be set to let the camera scan from one position to the next in a cycle at a set speed. This
feature is called the “auto cruise”. The cruise sequence and dwell time of each preset can be
set. It supports up to 8cruising tracks, each cruising track with 32 presets.
●
Pattern Tour
Dome can memorize 600S running path or 500 programmable instructions. When start
pattern tour, speed dome will move automatically according recorded action path. It supports
4 groups of pattern tours.
●
Guard Location
User could pre-set camera idle time and action mode (call preset/auto scan/auto se-
quence/pattern optional), the dome automatically returns to pre-set position if there is no oper-
ation in period of vacant time.
Product Overview
1.2 Functions