SIGMAKOKI HIT-M, Руководство пользователя

Страница: 15 / 74

15
Copyright 2018, SIGMAKOKI Co.,Ltd.
3-3.Memory Switch settings
The Memory Switches store the controller settings.
When changing Memory Switch settings use the Sample software (SGSample), which can be downloaded from
http://www.global-optosigma.com/en_jp/software/sample_en.html
3-4.Memory Switch contents list and detailed settings
3-4-1 General
No Memory Switch contents Setting Range / Select items Default Value
1 Speed SEL 1 - 4 1
2 Speed 1(S) 1 - 999999999 10000
3 Speed 1(F) 1 - 999999999 100000
4 Speed 1(R) 1 - 1000 200
5 Speed 2(S) 1 - 999999999 30000
6 Speed 2(F) 1 - 999999999 300000
7 Speed 2(R) 1 - 1000 200
8 Speed 3(S) 1 - 999999999 70000
9 Speed 3(F) 1 - 999999999 700000
10 Speed 3(R) 1 - 1000 200
11 Speed 4(S) 1 - 999999999 100000
12 Speed 4(F) 1 - 999999999 1000000
13 Speed 4(R) 1 - 1000 200
14 MODE_SEL SHOT/HIT HIT
15 OUT Level Normal High/Normal Low Normal High
16 LED_ON ON/OFF ON
1) SPEED SEL: Speed selection at Power ON
Select the initial setting Speed No. at Power ON.
[Setting Range] 1 ~ 4
2)
～
13) Speed 1
～
4(S)(F)(R): Speed Setting
Set 4 kinds of travel stage Speed (minimum S, maximum F, and acceleration/deceleration time R) at Power ON.
[Setting Range] S
：
1
～
500000 (Unit
：
pulse/s) [SHOT mode]
S
：
1
～
999999999 (Unit
：
0.01 µ m/s) [HIT mode]
F
：
1
～
500000 (Unit
：
pulse/s) [SHOT mode]
F
：
1
～
999999999 (Unit
：
0.01 µ m/s) [HIT mode]
R
：
1
～
1000 (Unit
：
ms) [SHOTmode][HITmode]
*) Minimum S values should be set smaller than maximum F at Speed Setting.