ZIRC-SD3502 Z-Wave AV / IR Remote Control
1
1
All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be
edited, copied or circulated without prior written agreement by Sigma Designs.
© 2012 Sigma Designs, Inc.
On entering Z-Wave AV mode, the LED will blink green once. In this mode, successful AV commands
sent to the STB are indicated by a single green LED blink. While the button is kept depressed, keep alive
is sent every 200 milliseconds and the LED will continue to blink green accordingly.
Pressing SETUP+PLAY or SETUP+STOP will send a Basic ON or OFF respectively to turn on and off any Z-
Wave equipment that is not AV capable.
In Z-Wave AV mode the buttons are mapped as in the table below.
