MOUNTING AND REMOVING THE LENS.
This camera uses the SA type bayonet mount. For ordinary lenses use the inside bayonet mount (type SA-IB)
and for Super Telephoto lenses use the outside bayonet mount (type SA-OB). The mounting methods are same
for both type of mounts.
Remove the Camera's body cap and I lens mount cap.
Align the red mark on the camera's mount with the alignment dot on the lens. Engage the lens in the mount by
turning the lens clockwise until it clicks into the locked position.
4www.butku s.org
To ensure proper connection, please do not press the lens lock button while mounting the lens.
To remove the lens, press the lens lock button and turn the lens counter-clockwise until it stops.
Gently remove the lens from the mount.
**On the mount surface of the lens, there are a number of electric contacts. Please keep them clean to ensure
proper connection. To avoid damaging them, be sure to place the lens with its front end down when it is off the
camera.
HOLDING THE CAMERA
Even the slightest movement of your body, while pressing the camera's shutter release, may cause camera shake
and a resulting blurriness of your photograph. To avoid this we suggest the following:
Hold the camera steady with your left hand supporting the bottom of the camera and the lens. Keep your left
elbow close to your body and place your eye as close to the viewfinder as possible. Firmly grasp the camera's
grip with your right hand and then lightly place your right index finger on