15
2. Choose the Flash Mode by using MODE button (P-TTL, WIRELESS
FLASH can be used).
3. Press the + or - button and make the indicate
indicator appear
on the LCD panel.
4. Focus on the subject
5. When the Ready Light of the flash is illuminated, the unit is ready for
use.
◆
If the camera’s synchronized speed is slower than the camera’s shutter speed, it switches to ordinary
flash.
◆
Depending on the shutter speed, the Guide Number will be changed.(Please refer to table2 on the last
page)
◆
If you want to cancel the FP Flash mode, please follow the FP flash procedure to make the
indicator
display from the LCD panel.
SECOND CURTAIN SYNCHRONIZATION
When you photograph a moving subject with slow synchronization, usually the furrow of the subject will be
exposed in front of the subject. The ordinary flash light will fire when the first shutter curtain is fully opened,
thus the subject will be exposed from the time flash is fired to the time the shutter is closed (This is called
First Curtain Synchronization). When you use second curtain synchronization, the flash will fire just before
the second curtain begins to closes, and the subject will be exposed by ambient light from the time the
shutter opens until the flash fires. The furrow of the subject will therefore be exposed behind the subject,
creating a more natural effect.
1. Set the desired picture-taking mode of the camera
2. Select the Mode of the flash. (TTL mode)
3. Press + or – , button
mark will be displayed on the LCD panel.
4. Adjust the focus, and take the picture after confirming the ready light is
lit.
◆
First curtain synchronization will be set, if
mark is not displayed.
◆
To cancel second –curtain synchronization, turn off the
mark on the LCD panel.
MODELING FLASH
If you use the Modeling flash, you can check the lighting and shadow effects, before you take the picture.
1. Press the MODE button and select the mode.
2. Press the + button or – button several times to make the
icon on the LCD panel appear.
3. Confirm that the flash is charged, then press the TEST button to fire.
EXPOSURE COMPENSATION
(Only for P-TTL compatible cameras)
You can use flash exposure compensation in combination with normal exposure compensation (to control
the background exposure level) in flash picture. Flash exposure compensation can be set 1/2 stops in
-3~+1 stop increments.
1. Choose the Flash Mode by using MODE button (P-TTL, HIGH SPEED
SYNC FLASH, WIRELESS FLASH can be used).
2. Press the SEL button to make the indicator of
mark blink.
3. Press the + button or – button to set the compensation amount.
4. Press the
SEL
button to make compensation amount indicator stop
blinking.
5. Focus on the subject.
6. You can take the picture after confirming that the Ready Light of the
flash is illuminated.
◆
To cancel exposure compensation, please start from step 2 and
choose
0.0
on display.
