Sigma BMR 20, Инструкция по эксплуатации и обслуживанию

Страница: 7 / 39

Instruction, use and maintenance manual Pag. 7/39 BMR 20-20H-30 Planetary Mixer
4. General safety standards
The safe and systematic use of the machine is subject to compliance with the below listed standards and
behaviours.
4.1. Safety standards.
•
Personnel must be in good physical and psychological conditions, and appropriately instructed on how to use
the mixer by reading this document.
•
When choosing the person who will be using the equipment (person fit to work according to the laws in force),
the company safety manager in the operating area or in the department must consider the person's education,
physical suitability and psychological aspect (mental balance, sense of responsibility, etc.). Based on the
observed skills and capacities, the manager must appropriately train the person by having him/her read this
document so as to provide thorough knowledge of the machine and the rules of conduct that apply to it.
•
The space around the machine must be well-lit, uncluttered and clean.
•
Personnel in charge of running, cleaning and servicing the machine must wear the prescribed PPE (personal
protective equipment).
•
Do not wear loose clothing or dangling items (ties, napkins, torn clothes, open jackets, etc.) to avoid the risk of
entanglement.
•
During maintenance and cleaning operations, the operator must disarm the master switch and put the system
into safety mode (for example, by removing the plug).
•
Never leave the machine unattended during operation, pay attention to unusual sounds or behaviour and keep
away from rotating parts. Never open the grid before the tools have stopped completely.
•
At the end of work, completely empty the machine, disengage the master switch by cutting power, put it in
safety mode and clean it with a mild degreaser (i.e. castile soap).
4.2. Safety devices.
The machine is equipped with some devices to protect its operation and the operator's safety; they must never be
removed and modified and their operation must be periodically verified.
•
Master switch: disconnects power to the machine, for safe maintenance.
•
Circuit breaker: disconnects power in case of overheating of the electric motor.
•
Inverter power lock: disconnects power in case of overload of the electric motor (only if there is an inverter).
•
Fixed guards: all casings and protections fixed with screws or mechanical blocks can only be removed for
maintenance, by qualified personnel and as prescribed. Once the work is completed, they must be immediately
reassembled.
•
Mobile guards: properly closed mobile guards allow the machine to be used.
A lack of these conditions prevents operation.