Refrigerated Centrifuge with Heating System Sigma 3-18KHS
Index
88 / 89
Version 08/2012, Rev. 1.21 of 08/05/2020
• sb
Translation of the original operating manual, part no. 0701202
Relative centrifugal force (RCF) ........... 14, 35
Removal of a rotor ............................... 29, 30
Removal of the transport safety device ...... 25
Remove glass particles and metal dust from
the rotor chamber ................................... 64
Responsibility of the operator ..................... 17
Return of centrifuges, spare parts, or
accessories ............................................ 67
Return of defective parts ............................ 67
Risk of electrical shock............................... 18
Rotor chamber ........................................... 60
Rotor identification, automatic .................... 37
Rotor monitoring system ............................ 22
Rotor radii .................................................. 72
Rotor selection list ...................................... 37
Rotor tie-down screw ........................... 29, 62
Rotor with the g-lock® system, installation . 30
Rotor wrench ............................................. 29
Rotors and accessories with a different
service life ........................................ 21, 76
Rotors for microtiter plate formats .............. 29
Rotors, cleaning and care .......................... 62
Runtime ..................................................... 36
Runtime as of set speed ............................ 46
S
Safety area ................................................ 20
Safety devices ........................................... 22
Safety distance .............................. 18, 20, 26
Safety instructions ............................ 9, 29, 32
Safety instructions for centrifugation .......... 20
Safety of rotors and accessories ................ 21
Safety, chemical and biological .................. 19
Safety, electrical ........................................ 18
Safety, mechanical ..................................... 18
Safety-conscious work ............................... 17
Saving a program....................................... 52
Scope of supply ......................................... 10
Selection, display, and modification of data 34
Serial number ................................ 12, 59, 66
Service ....................................................... 66
Service contact .......................................... 59
Service life ................................................. 60
Service life of rotors and accessories ... 21, 76
Service life of the accessories .................... 65
Service work .............................................. 66
Set-up and connection ............................... 26
Setup menu ............................................... 46
Short run .................................................... 36
Solvents ......................................... 20, 60, 62
Sound signal .............................................. 22
Sound signal (warning) .............................. 48
Spare part enquiries ................................... 59
Speed ...................................... 12, 14, 35, 70
Speed/RCF fine ......................................... 47
Speed-gravitational-field-diagram .............. 73
Speedometer error ..................................... 58
Spin-out from set speed ............................. 44
Standard menu .......................................... 35
Standards and regulations ......................... 10
Standstill cooling ........................................ 42
Standstill monitoring system ...................... 22
Start delay.................................................. 47
Starting a centrifugation run ....................... 34
Starting a process ...................................... 41
Sterilisation of the rotor chamber and
accessories ............................................ 64
Stopping of the centrifuge due to an
imbalance ............................................... 63
Storage and transport ................................ 24
Storage conditions ..................................... 24
Storage locations ....................................... 70
Stress-corrosion
see
corrosion ............................................. 62
Structural changes ..................................... 19
Supply voltage ........................................... 26
Switching the centrifuge off ........................ 55
Switching the centrifuge on ........................ 28
System ....................................................... 48
System check ............................................ 22
System error ........................................ 56, 58
T
Table of error codes ................................... 58
Table of rotors and accessories with a
different service life .......................... 21, 76
Technical data ........................................... 70
Technical documentation ........................... 71
Temperature .............................................. 35
Temperature error ...................................... 58
Temperature inside the rotor chamber ....... 22
