Refrigerated Centrifuge with Heating System Sigma 3-18KHS
6 Using the centrifuge
30 / 89
Version 08/2012, Rev. 1.21 of 08/05/2020
• sb
Translation of the original operating manual, part no. 0701202
NOTE
The rotor can also be used without a cover.
NOTE
The lid screw serves for the fastening of the lid onto the rotor only, not for
the fastening of the rotor onto the motor shaft.
Removal of a rotor
• Unscrew the rotor tie-down screw (counter-clockwise) and remove the
rotor with the lid.
• Open the lid by turning it counter-clockwise and remove the lid.
1
Rotor tie down screw
2
Lid
3
Rotor
Fig. 5: Angle rotor with a hermetic lid
Pos : 111 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1
Pos : 112 /100 Sigma/100 BA Z entrif ugen Sigma (St andardm odul e)/060 Betrieb_Spi nc ontr ol L+S/ 060- 0020-0020-0030 Eins et zen eines R ot ors mit g-lock-Sy st em @ 7\m od_1306402032880_68.docx @ 43576 @ 4 @ 1
→
6.2.2.3
Installing a rotor with the g-lock
®
system
The handling of a rotor with the g-lock
®
system is described in a separate
instruction manual.
NOTE
See the separate instruction manual concerning the g-lock
®
rotor quick-
lock system!
Pos : 113 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
