Sigma V KT848, Руководство по установке

Страница: 25 / 48

Page 21
Program 04: System setting #1
The upper row display: SYSTEM SETTING 1
The lower row display: - ABCDE (Default: 00410)
A: 0~1 (Day/Night mode switch: 0 - Manual, 1 - Automatic)
B: 0~1 (Alert tone for paging call: 0 - No, 1 - Yes)
C: 1~4 (Number of rings of delay ringing; setting the time delay ringing for incoming
calls through the CO/PBX line)
D: 0~1 (Time to start reckoning: 0 - Start reckoning after 25 seconds of dialing the last
digit, 1 - Start reckoning after 5 seconds of dialing the last digit)
E: 0~1 (Enter the option when hearing Auto Attendant announcement: 0 - enter after
the speech, 1 - enter when the speech)
Programming for single line phone:
Enter the values of ABCDE and then press # to return to the main menu.
Notes:
1. If the day-night transfer is set to automatic mode, it will be subject to the settings of
program 08.
2. The setting for ringing times is related to settings in program 08.
3. The time to start reckoning in this program is related to the call accounting program.
Program 05: System setting #2
The upper row display: SYSTEM SETTING 2
The lower row display: - FGHIJ (Default: 01100)
F: 0~1 (Transfer to operator after Auto Attendant announcement: 0 - No, 1 - Yes)
G: 0~1 (Transfer method of DSS: 0 - press the TRF key and then press direct key, 1 -
press direct key to extension)
H: 0~3 (Start timer of Call Account: 0 - immediately, 1 - delay 10 sec, 2 - delay 30 sec,
3 - delay 60 sec)
I: 0~9 (Hold recall alert timer in min.)
J: 0~1 (Restricted line pickup preference: 0 - enable, 1 - disable)
To enable CO pickup by dial 9 for restricted lines and dial 8 for non-restricted lines
(refer to program 01)
Programming for single line phone:
Enter the values of FGHIJ and then press # to return to the main menu.