SIGLENT
SPD3303S/3303D Quick Start 25
Chapter 3 Remote control
The SCPI Commands are used to perform remote control through
USBTMC.
Connect the USB device on the rear panel to computer which has
been installed with EasyPower software or NI
（
Measurement &
Automation
）
.
3.1 Command list
1. *IDN?
2. *SAV
3. *RCL
4. INSTrument {CH1|CH2}
5. INSTrument ?
6. MEASure:CURRent?
7. MEAsure:VOLTage?
8. MEASure:POWEr?
9. [SOURce:]CURRent <current>
10. [SOURce:]CURRent ?
11. [SOURce:]VOLTage <volt>
12. [SOURce:] VOLTage?
13. OUTPut
14. OUTPut:TRACk
15. OUTPut:WAVE
16. TIMEr:SET
17. TIMEr:SET?
18. TIMEr
19. SYSTem:ERRor?
20. SYSTem:VERSion?
21. SYSTem: STATus?
