SIGLENT SDM3065X, Руководство пользователя

Страница: 52 / 108

SIG L ENT
40 SDM3055 Digital Multimeter
To Measure Capacitance
Range: 2nF, 20nF, 200nF, 2
μ F, 20μ F, 200μ F, 2mF, 20mF, 100mF
Max Resolution: 1pF (in the range of 2nF)
Input Protection: a 1000 V protection is available in all ranges. If the
reading exceeds the range,
“
overload
”
will be displayed.
Operating Steps:
1. Enable the Capacitance measurement
Press on the front panel to enter the Capacitance measurement
interface, as shown in Diagram 2- 15.
Diagram 2- 15 Capacitance Measurement Interface
2. Make connection
Connect the test leads with the measured signal by referring to
“Measurement Connections”.
3. Set the range
Press
【
Range
】
to select a range for the measurement. You can also use
the , , and keys on the front panel to select the range.
Auto (autorange) automatically selects the range for the measurement
based on the input. Autoranging is convenient, but it results in slower
measurements than using a manual range. Autoranging goes up a range
at 110% of the present range, and down a range below 10% of the
present range.
4. Set the relative value (Optional operation)
Press
【
Rel
】
to open or close Relative math function. When it is opened,