EAN-DRS-Cameras
© SightLine Applications, Inc.
2
3
Interface Boards and Adapters
System interface boards provide options for network interfacing, serial ports, and GPIO.
Camera
interface and adapter boards provide an interface from the camera to OEM.
See the
for complete specifications and pinouts.
IMPORTANT:
All boards should be connected and secured with the included cables and hardware
fasteners first before applying power.
4
Hardware Connections
4.1
1500-OEM DRS Camera Bench Setup
See
for the complete list of supported DRS cameras.
Interface and adapter boards:
•
: DRS camera and SLA-1500-FPC interface.
•
: DRS camera and
interface. The 1500-OEM supplies power to the camera
through the SLA-1500-FPC board.
•
: Provides serial and network interfaces.
Cable connections:
•
SLA-CAB-1514: Connects to the 1500-OEM J3 (14-pin) connector and to the 1500-AB J3 (14-pin)
connector. Provides analog video, network, and serial connections to the 1500-OEM board.
•
SLA-CAB-FPC04: Connects to the SLA-1500-FPC board and to the DRS camera. Provides serial
communication and video to the camera. See
•
SLA-PWR-B05V (110-250VAC input / 5VDC output): Connects to J2 on the SLA-1500-AB board.
Power and network connectivity LEDs:
A green light indicates the 1500-AB board is powered on. A blue light on the 1500-AB and a green light
on the 1500-OEM board indicate that all the boards are powered on. A second flashing green light on
the 1500-OEM indicates network connectivity.
Figure 2: 1500-OEM Tamarisk Camera Bench Setup
Network Switch or PC Direct
VOUT
VIN1
VIN0
DRS Camera with
SLA-FPC-DRS
1500-OEM +
SLA-1500-FPC
SLA-CAB-FPC04
Serial 0
SLA-1500-AB (Rev H)
SLA-PWR-B05V
SLA-CAB-1514 (J3)
RJ45 Ethernet
PWR Switch
to OEM
IMPORTANT:
Disconnect all input
power to OEMs and adapter
boards before connecting or
disconnecting cables.
