Office Caddy Meeting
18
Preparing for use
Assembly
7. Place the “Meeting” office caddy upright.
8. Lock the castors to prevent the “Meeting” office caddy from rolling away.
9. Place 1 metal bracket (no. 3) in the required position on the lower part of the profile (no. 1).
The two nibs on the metal bracket have to engage with the notches on the profile.
10. Tighten 1 M6 screw (no. 5) with the smaller of the enclosed hex keys (no. 7).
11. Repeat steps 9 and 10 for all the other metal brackets. The metal brackets can be mounted on
the left or the right of the profile. You will find different options for arranging the office boxes
in chapter 5.4, “Combination options for the office boxes”.
Fitting a SIGEL office box onto the metal bracket (Office Box S shown here)
12. Slide the office box of your choice onto the metal bracket until it clicks into place.
9
The “Meeting” office caddy has been successfully assembled.