Office Caddy Workplace
22
Disassembly
Dissembling the Office Caddy Workplace
7
Disassembly
7.1 Dissembling the Office Caddy Workplace
The “Workplace” office caddy is disassembled as follows:
1.
Clean the worst of the dust and dirt from the “Workplace” office caddy.
2.
Detach all office boxes from the metal brackets (no. 4).
3.
Loosen the M6 screws (no. 6) from the top metal bracket (no. 4) with the smaller of the
enclosed hex keys (no. 8).
4.
Detach the metal bracket (no. 4).
5.
Repeat steps 3 and 4 for all other metal brackets (no. 4) from top to bottom.
6.
Loosen the 4 M10 screws (no. 5) connecting the feet to the profile (no. 1) using the larger of
the enclosed hex keys (no. 7).
7.
Remove the 4 M10 screws (no. 5) along with the 4 grommets.
8.
Remove the long foot (no. 2) and the short foot (no. 3).
9
The “Workplace” office caddy has been successfully disassembled.
7.2 Disposal and recycling
When the “Workplace” office caddy has reached the end of its life cycle,
make sure you dispose of it safely and correctly after disassembly.
The “Workplace” office caddy and its packaging should be disposed of
according to local waste disposal regulations and environmental laws.
Dispose of recyclable materials properly and in an environmentally friendly
way. The packaging is made of plastic and cardboard, and should be recycled separately.
For further information about waste disposal, contact your local authority.
8
Legal notice
8.1 Guarantee
The SIGEL brand stands for quality, functionality and design
An integral part of SIGEL’s company philosophy is to always provide our customers with top-quality
brand products. To satisfy this key demand for top quality, SIGEL products undergo strict quality
controls.
1.
The guarantee period begins on the date of purchase.
2.
The valid statutory guarantee applies.
3.
The guarantee does not apply in cases of misuse, negligence, improper use or other uses of
the product that do not correspond to the enclosed user guide.
4.
Guarantee claims will only be accepted upon presentation of the original proof of purchase,
which states the date of purchase and product description, along with the defective pro-
duct. SIGEL is free to either exchange the product or to reimburse the purchase price to the
consumer.
For further information about the manufacturer’s guarantee and terms of guarantee,
visit www.sigel-office.com/de/herstellergarantie/.
8.2 Copyright and proprietary rights
All contents of this user guide are the intellectual property of SIGEL GmbH and are subject to
copyright protection.
The product, wordmark and design mark are legally protected.
Any duplication, processing, distribution, transfer to third parties – in whole or in part – and all
types of utilisation outside the boundaries of copyright law require written permission from Sigel
GmbH. SIGEL GmbH reserves the right to take legal action against any violations.
SIGEL reserves the right to make changes to this user guide or to the technical details given in the
information and illustrations in this user guide.