SIG Cloud Ranger HHR508, Руководство по сборке, Страница: 3 / 8

.
Additional Items Required
(Not Included in Kit)
Note: These are parts that we have used and are
familiar with. There are many other brands available
and you may substitute other items that you are more
comfortable with or have on hand.
1 Engine .049 to .061 Engine with throttle or
Speed 400 Electric Power system
1 Radio 3 or 4 Channel Radio with Mini
servos (ailerons require 2 servos)
3 Hinges Sig Easy Hinges #SH-710 or Du-Bro
Kwik Hinge #537
2 Yellow Covering
Material
2 Rolls Iron on covering material
2 3/32 Wheel
Collars
Sig #SH-585 or Du-Bro #138
1 1/16 Wheel
Collar
Sig #SH-584 or Du-Bro #137
2 Main Wheels 2 1/4 Du-Bro #225T
1 Tail Wheel 3/4 Sullivan #351 T1 Tail Wheel
2 Wheel Bushings Make from K&S Brass Tube #127
For Glow Power you will also need the following items:
1 Throttle Pushrod
Assembly
Sig #SH-559 or Du-Bro #165
1 Motor Mount Dave Brown #0506
4 Motor Mount
Screws
4-40 x 3/4 Machine Screws and
Blind Nuts Sig #SH-111 or Du-Bro
#129
1 Fuel Tank Sullivan 2oz. #SS-2
1 1/2-A Fuel Line Sig #SH-288 or Du-Bro #221
1 Propeller Grish Tornado 6-3 Nylon Propeller
#GRIQ1050
We offer a complete Speed 400 electric power system that is factory matched to this airplane. See the enclosed flyer or contact
us at the factory for further information.
General Note: Cover the plans with wax paper before assembling your model to prevent the parts from sticking to the plan.
Building the Tail Surfaces
1.
Join R-1 and R-2 together over the plan. Temporarily hinge the rudder (R-3) to the fin. Do not glue the hinges at this time.
Bend the tail wheel wire to shape and glue it into position into the bottom of the rudder.
2.
Join the elevators using the 1/8" dowel. Use the plan and the stabilizer as a guide. Trim the dowel as required to achieve
the proper length.
3.
Temporarily hinge the elevators to the stabilizer. Do not glue the hinges at this time.
4.
Sand the tail surfaces smooth and round all of the edges except the bottom edge of the fin.
Building the Fuselage
5.
Assemble the left fuselage side (F-1). Glue parts F-1A, F-1B, F-1C, F-2 and F-3 together as shown on the plan. Parts F-2
and F-3 are glued on the inside of the fuselage. Parts F-2 are marked with an L or R for the left and right side. Be sure to
make a left and a right side.