background image

9. After juicing, do not dismantle the detachable parts of the product until the motor and the juice 

strainer have both stopped and the power supply has been disconnected.

10. Operate with  the rated operating time strictly: Juice continually for 1 minute each time,  at most.   

After ending any function above, stop for 2 minutes to end a cycle. Stop for 15 to 20 minutes after 
3 successive cycles and start again after the motor has cooled down. This practice can prolong life 
of the product.

11. If the product stops running while in use, it is possibly caused by the temperature protection of the 

motor. D isconnect the power supply for cooling and use the product 15 to 20 minutes later.

12. To avoid deformation and damage caused by heat, do not disinfect any accessories in hot water 

above 80

or microwave ovens. Parts of the juicer in contact with food materials should be clean, 

hygienic, reliable and in compliance with relevant food hygiene certification.

13. D o not place main unit of the product into water or other liquids, or flush out with water or other 

liquids (it can be wiped with  a soft cloth).

14. D o not clean the product with steel wool, abrasive cleansers, or corrosive liquids (such as gasoline 

or acetone).

15. Put the product in a place out of reach of children. U se or play of the product by persons with 

disabled  limbs,  sensory  or  mental  disorders,  or  by  persons  without  relevant  experience  or 
knowledge (including children) is forbidden.

16. D o not process any fruits or vegetables with cores, hard seeds, shells, or thick skins until their cores, 

hard seeds, shells, or thick skins have been  removed.

17.

This product is suitable for individuals and/ or families only.

Chapter 2:    Parts and their functions

Содержание SIF-1001









Отзывы: