Sierra Titanium Power TM1200.1D, Руководство пользователя

Страница: 5 / 19

8. Connect the speakers. Strip the speaker wires 5/8" and insert into the appropriate terminal on the
amplifier. Insert the bared wire into the speaker terminal and tighten the set screw to secure
into place. Be sure to maintain proper speaker polarity. DO NOT Chassis ground any of the
speaker leads as unstable operation may result.
9. Perform a final check of the completed system wiring to ensure that all connections are accurate.
Check all power and ground connections for frayed wires and loose connections which could
cause problems.
10. After the final inspection is complete, install the power fuse and enjoy listening. During the initial
listening period, you may need to "fine tune" any phasing and level settings within your particular
vechicle. To aid in this procedure, play a track with high musical content and cruise around your
neighborhood. After fully evaluating the transient response of your system and making any final
adjustment,s all your neighbors within a 1 mile radius will assume that you have just successfully
completed another upgrade to your audio system for which they will probably spill thumbtacks
on your driveway.
4. Battery and Charging
Amplifiers will put an increased load on the vehicle's battery and charging system. We recommend
checking your alternator and battery condition to ensure that the electrical system has enough
capacity to handle the increased load of your stereo system. Stock electrical systems which are
in good condition should be able to handle the extra load of any amplfiier without problems,
although battery and alternator life can be reduced slightly. To maximize the performance of
your amplifier, we suggest the use of a heavy duty battery and an energy storage capacitor.
D. Safety warnings
We always recommend you have your amplifiers professionally installed but the
installation process is often so easy that the average consumer can achieve
success with little trouble. Regardless of the person installing, you should be
sure to review the following points before proceeding with the installation :
■
READ THE MANUAL! Understanding the product and installation limitations
before lifting a screwdriver.
■
WEAR SAFETY GLASES AT ALL TIMES - Flying debris are always dangerous.
■
PROTECH THE VEHICLE - Always disconnect the negative battery cable before starting any
kind of installation work. This prevents a possible high current electrical short (postential fires).
■
GIVE YOURSELF LOTS OF TIME - Rushing to complete an installation nearly always ends up
with problems.
■
DO NOT LISTEN AT HIGH SOUND LEVELS FOR A PROLONGED TIME - these amplifiers, used
with high efficiency speakers from any manufacturer, have the potential to cause permanent
hearing loss after listening at maximum volume levels for several hours.
■
CAUTION - FUEL THANKS AND FUEL LINES ARE NOW LOCATED DIRECTLY BENEATH THE
REAR DECK IN MANY CARS - CHECK FOR ADEQUATE CLEARANCE BEFORE EVEN
CONSIDERING SUCH A MOUNTING LOCATION!