background image

16 of 17 

 

 

 

 

LIMITED WARRANTY

 

MVP Group Corp., (Sierra Range, hereby referred to as “Sierra”), warrants all new cooking equipment bearing the name 
“SIERRA” and installed within the continental United States of America* or Canada to be free from defects in material or 
workmanship, under normal and regular usage and operation for a period of one (1) year following the date of original 
installation, but in no event can exceed eighteen (18) months from the date of shipment from the factory, unless specified 
otherwise. 
 
If a defect in material(s) or workmanship is detected, or found to exist within the stated period above, MVP Group Corp., at 
its sole discretion, shall either repair or replace any original part which has proven to fail within the machine, providing that 
the equipment has not been altered or tampered with in any manner, has been installed correctly as per the owner’s manual, 
and has been maintained and operated in complete accordance with this manual. The labor cost to repair or replace any part 
proven to be defective, as per above clause(s), shall be covered by MVP Group Corp., within the United States of 
America* or Canada; provided that: prior authorization for this labor was pre-approved by MVP Group Corp., the service 
work was performed by an authorized MVP Group Corp. service agent; and that this agent installed an original and genuine 
Sierra part in the machine. Any repair work performed by a non-authorized service agent remains the sole responsibility of 
the user, and MVP Group Corp. will not be held responsible. The installation of any generic part will not be valid; and 
therefore voids this warranty. All authorized labor coverage shall be limited to regular hourly rates only. Any supplemental 
hourly rates or charges, such as weekends or emergency premiums, remain the responsibility of the user. MVP Group 
Corp. (Sierra) hereby states that: warranty travel time shall be limited to, and without exception, a round-trip total of two 
(2) hours OR mileage up to a maximum of one hundred fifty (150) kilometers round-trip. Any charges exceeding those 
stated herein must have prior authorization by the factory. 
 
A special warranty covers the SRF series. These units carry the regular one (1) year parts and labor plus an additional fry 
tank warranty to the original end user only; if the fry tank leaks within the first two (2) years of operation due to a 
manufacturing defect, as confirmed by an MVP Group Corp. authorized service agent, MVP Group Corp. shall replace the 
fryer in its entirety. Any associated freight and/or installation charges shall not be included with the replacement. 
Exceptions to above warranty are: (A) Damages resulting from shipping, handling or abuse. (B) Incorrect installation 
and/or connections. (C) Adjustments or calibration of any thermostats or timers. (D) Faults due to lack of regular 
maintenance or cleaning of any internal or external part(s). (E) Replacement of any wearable items such as: baskets, grills, 
knobs, etc. (F) Excessive soot accumulation due to poor gas conditions. (G) Poor results due to: excessive or inadequate 
temperature(s) or gas pressure conditions (H) Failure to follow manual’s lighting instructions, maintenance and/or usage. 
MVP GROUP CORP. STATES THAT THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, THAT 
ARE NOT SET FORTH HEREIN. MVP GROUP CORP. SHALL ASSUME NO OTHER RESPONSIBILITY, EITHER 
DIRECT OR NON-DIRECT, OR BE LIABLE FOR ANY OTHER ADDITIONAL LOSS OR DAMAGE, WHETHER 
DIRECT OR CONSEQUENTIAL, AS A RESULT OF ITS EQUIPMENT. *Some exceptions apply. The manufacturer 
reserves the right to alter design and specifications without notice. 
*RESIDENTIAL APPLICATIONS: MVP Group Corp. assumes no responsibility nor liability for any parts, or labor 
coverage for component failure, or other damage resulting from installation in residential or non-commercial applications.  
 
“Sierra Range” is a registered trademark of MVP Group Corp. 
 
 

 
 
 

Содержание SR-10B-60


















Отзывы: