This Quick Install Guide is Applicable for the InnovaSonic
®
210.
A copy of this Quick Install Guide and the
210 Instruction Manual
are included on the product information CD included in your
shipment. The information is also available for
download
.
Keypad Functions
The InnovaSonic 210i keypad offers 12 dual-function keys for operation of the menu system plus six quick-setup keys. For quick setup
of your InnovaSonic, simply press any of the keys across the top to get the desired menu parameter instantly.
Follow these guidelines when using
the InnovaSonic 210i menu system:
Keys
to
and
are the menu codes to input
information required for flow measurement.
Use
to delete characters to the left.
Use
and
to return to the last menu or open the next menu.
These keys acts as "+" and "-" when used to enter numbers.
is used to select a menu using two digit numbers from the menu. To
enter a selected menu, press
key first then press your selected digit
numbers. Hit enter to save the selected menu. For example, to input a pipe
outside diameter, press
keys, where “11” is the
window ID to display the parameter for pipe outside diameter.
After all data is selected use
to confirm your choices.
Use
to enter / exit the SD card storage
interface.
,
, , , ,
are
shortcuts to the windows for Flow Rate, Velocity,
Signal Quality, POS Totalizer, Graph, and Diagnosis.
Installation Steps
1.
Plug in the transducers (See Figure 2). Open the hinged top
cover of the electronics. Figure 2 shows the downstream
transducer connector, upstream transducer connector, the
battery recharge port (charge the transmitter or connect to a
standby power supply), and the 4-20mA output connector.
Figure 1. InnovaSonic 210i Keypad with Dual Function Keys
Figure 2. Transducer Connections
