Sierra C100L-L-DD-LE-5-OV1-SV1-PV1C-V1-S1 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 55

background image

Sierra Instruction Manual

MaxTrak 180

24

3.

Additional Features include:

•

Re-boot the SmartTrak microprocessor

•

Change the Communication Port

•

Links to Sierra Instruments’ Web Site

•

Specifications

4.2

Power Up Your Instruments

WARNING:

The SmartTrak is not a loop-powered device. Do not apply power to the 4-20 outputs.

After your instrument is installed and the system has undergone a complete leak check (discussed in detail in Chapter
2), apply power using Sierra’s power supply or your own input power source. See Chapter 2, for power supply
requirements. The green LED at the top of the left side will light. If your instrument has a Pilot Module, it will
begin its start-up cycle. See Chapter 4 for details on Pilot Module operation.

If you have a Mass Flow Controller, the valve will remain closed until power is supplied. Remember that the valve
in the SmartTrak controller is not a positive shut-off device.    When power is applied, the flow control valve will
operate  per  any  instructions  it  receives.    When  the  SmartTrak  is  delivered,  the  valve  will  be  in  the Automatic
(Normal) state and the Pilot Module will provide the correct zero setpoint reference for the instrument.    As a result,
the valve will be closed.    However, the valve will return to the state it was in the last time the instrument was
operated.

WARNING:

If you do not know the position of the valve before it was shut down, you must assume that

the valve will open when power is applied. Take necessary precautions. The SmartTrak is not a loop-

powered device. Do not apply power to the 4-20 outputs.

4.3

Power Up Your Computer

Apply power to your computer per the manufacturer’s recommendations. The SmartTrak Software is compatible
with any computer running the following Windows Operating Systems:

Windows 7

Windows 98, 2

nd

Edition

Windows XP

Windows XP Professional

Windows 2000

«
...
22
23
24
25
26
...
»

Содержание C100L-L-DD-LE-5-OV1-SV1-PV1C-V1-S1
























































Отзывы:

Нет отзывов

Похожие инструкции для C100L-L-DD-LE-5-OV1-SV1-PV1C-V1-S1

Бренд: Unico Страницы: 10

Бренд: Topcon Страницы: 62

Бренд: IDT Страницы: 20

Бренд: LaserLiner Страницы: 80

AS-i CompactModule M8

Бренд: IFM Страницы: 4

Бренд: THE ELECTRON MACHINE CORPORATION Страницы: 32

Бренд: Milkotester Страницы: 44

Бренд: Oberheim Страницы: 41

Бренд: Newton Страницы: 112

Бренд: Vanguard Instruments Страницы: 85

Бренд: Fluke Страницы: 5

Бренд: PCE Health and Fitness Страницы: 4

Бренд: Fluke Страницы: 8

Бренд: Komshine Страницы: 2

Бренд: Zensol Страницы: 12

Бренд: Erma Electronic Страницы: 24

Бренд: Bartington Страницы: 32

Бренд: Alfano Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды