Sierra Wireless PinPoint X, Быстрый старт

Страница: 9 / 27

PinPoint X HSUPA/HSDPA
30 20070914
Figure 0-12: PinPoint X Indicator lights
• Network - Indicates a successful connection to the cellular network with an
IP address given and a channel acquired.
• Signal - Light shows the strength of the signal and may be nearly solid
(strong signal) or flashing (weaker signal). A slow flash indicates a very weak
signal.
• Activity - Lights will flash as data is transferred to and from the PinPoint
modem on the remote network.
• Service - Indicates when the connection is HSUPA/HSDPA or UMTS. Unlit
indicates EDGE or GPRS.
• GPS - Indicates a GPS fix. When lit, the PinPoint X has GPS coordinates to
report.
• Power - Indicates the power adapter is connected and there is power getting
to the PinPoint X.
• The Reset button (on the left side of the PinPoint X) has two functions. If it is
quickly depressed and released, the modem will simply power cycle the
internal hardware. If, however, the reset is depressed and held for several
seconds (count 10 slowly, and wait for the power light to go off after the light
pattern stops), the ALEOS configuration settings will return to the factory
defaults.
RSSI LED Ranges
RSSI/Signal LED
Status Ranges of RSSI (dBm)
On Solid Equal to or stronger than -69
Fast Blink -70 to -79
Normal blink -80 to -89
Slow Blink -90 to -99
Extinguished Equal to or weaker than -100
Caution:
If you reset the modem configuration using the reset button,
you may to reconfigure your APN.