Rev 2 Jun.15
Proprietary and Confidential - Contents subject to change
15
To select the power supply:
1.
Place the mangOH Development Board face-up and locate the power supply
jumper pins (CN1204).
Figure 3-7: mangOH—Power Supply Select (CN1204)
2.
Place a jumper across two pins to select the power source:
·
USB power—Place a jumper across the two pins farthest from the DC
power jack.
·
DC power—Place a jumper across the pins closest to the DC power jack.
Figure 3-8: Power Source Select (DC power shown)
Power supply
select (CN1204)
DC jack
USB
connector
USB select
DC select